OBD2 Code Lookup
Type any OBD2 trouble code like P0420 or P0300 to see what it means, how serious it is, the most likely causes and what to do next.
Look up a trouble code
Read it with an OBD2 scanner. Codes have a letter and four characters, like P0301 or U0100.
How to use the OBD2 Code Lookup
- Plug an OBD2 scanner into the port under the dashboard, usually near the steering column.
- Turn the ignition on and read the stored codes.
- Type a code here to see its meaning, severity and likely causes.
- Fix the cause, then clear the code and see if it returns.
For the full background, read our guide: How to Use an OBD2 Scanner to Read Car Codes.
How OBD2 codes are built
2nd digit: 0 = generic, 1 = manufacturer-specific
3rd digit (P codes): 1–2 fuel/air, 3 ignition, 4 emissions, 5 speed/idle, 6 computer, 7–9 transmission
Last two: the specific fault
Frequently asked questions
Can I drive with the check engine light on?
If it is steady, usually yes for a short time, but get the code read soon. If it is flashing, the engine is misfiring and you should reduce speed and get it checked right away to avoid damaging the catalytic converter.
Will clearing the code fix the problem?
No. Clearing only turns off the light. If the fault is still there, the code and light will come back.
What is the most common OBD2 code?
P0420 (catalyst efficiency), P0171 (lean condition), P0300 (random misfire) and P0455/P0442 (EVAP leaks, often a loose gas cap) are among the most common.
Where can I get my codes read for free?
Many US auto parts stores read codes for free, or you can buy a basic OBD2 scanner for $20 to $40.
Related tools
Code meanings are generic SAE definitions. Manufacturer-specific codes and causes vary by vehicle. This tool helps you understand a code; a proper diagnosis may need further testing.
